| BioKey® 3020 Hardware
OEM Module |
The BioKey® 3020 module was developed for direct integration in doors (electronic
lock systems) and switch sockets. |
Fingerprint reader and
controler unit (Relay on board) are connected
to a compact module at BioKey® 3020. For this reason the
assembling effort is obviously low. |
The fingerprint sensor
could be installed outside at the door, and
the module inside the door panel where it is protected.
The wiring between sensor and module can reach up to 40cm. |
With its size of 45mm x 46mm
the module is fitting in nearly every
usual sourface mount or flush mount variations. |
Voltage supply is 8~12V AC/DC
like it is known from conventional bell transformers. |
With its RS485 and Wiegand
interfaces, the module is well suitable for system integrators. |
|
| All-in-one
Stand-Alone Solution, no additional hardware needed |
| Compact: Fingerprint reader and controller(Relay on board) are jointed in one unit.
|
|
Optimized size for sourface / flush mount |
|
Safety : Fingerprint sensor outside
and the module inside where it is protected (flex cable connection > 40 cm). |
|
Easy montage: all connections are screwable. |
| Interfaces: RS485, Wiegand |
| Suitable
for outdoor applications |
| RoHS ready |
| BioKey® 3020 Technical Details |
Size:
|
45mm
(B) x 46mm (L) |
| Processor: |
ATMEL ARM9 |
| Sensors: |
Sweep
Sensor: ATMEL FingerChip™ |
| Interfaces: |
RS485,
Wiegand |
| Voltage
supply: |
8~12V AC/DC
Relay on Board |
| Maximum
number of templates: |
2000 |
| Encoding
time: |
<
1.0 sec per encoding
|
| Matching
time: |
<
14 ms per match |
Downloads |
|
|
|
|
| Contact
us